0.25nickel_10ms_Pink Published November 17, 2017 at 2016 × 1512 in DIY Arduino Battery Spot Welder Prebuilt Kit V4 0.25mm nickel strip – weld time 10mS – 770A car battery – modified Spot Welder with 4 paralell TVS diodes to handle the high current.← PreviousNext →
reza ghissanejad says:Does it need to be modified or it already modified to handle the higher amp and weld thicker strip December 10, 2020 at 19:25 Reply
Marc Schoenfleisch says:The current version of the welder does not need to be modified for 0.25mm nickel strip. For even better welding results you can use slotted nickel strip. This will result in lower pulse time or less amps required to get good welds. December 14, 2020 at 08:25 Reply
Does it need to be modified or it already modified to handle the higher amp and weld thicker strip
The current version of the welder does not need to be modified for 0.25mm nickel strip. For even better welding results you can use slotted nickel strip. This will result in lower pulse time or less amps required to get good welds.